Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulb of the Seat Leon - Altea

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Interior dome light bulb

See other generations:
Video tutorial

Today, let's discover the steps to remove and replace the interior light bulb of the Seat Leon, as well as the Altea. First, get inside the vehicle and start removing the plastic cover of the interior light, prying at the sides with something thin and pointed; then remove the bulb sockets found inside, prying on the bulb holder to remove it if necessary (disconnecting the electrical connector found at the back), as shown in the video.

At this point, install the new bulbs and then reassemble the interior light!


Updated on 27 August 2026 by ScegliAuto


Related tutorials

Replacing the Number Plate Light on the Seat Leon - Altea
Replacing the Number Plate Light on the Seat Leon - Altea
Seat Leon (2005-2013 / 1P) .. plate light on the Seat Leon, as well as the Altea and Ibiza. First, remove the entire light unit by prying the sides with something thin and pointed... …
How to Replace the Front Indicator Bulb on the Seat Leon
How to Replace the Front Indicator Bulb on the Seat Leon
Seat Leon (2005-2013 / 1P) To replace the front indicator bulb on the Seat Leon, open the bonnet to access the bulb located on the side of the front headlamp. You can reach the…
How to Replace the Rear Headlight Bulb on a Seat Leon?
How to Replace the Rear Headlight Bulb on a Seat Leon?
Seat Leon (1999-2005 / 1M) You can replace the rear headlight bulb on a Seat Leon by opening the rear hatch to access the boot. Once open, detach the side panel corresponding t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos