Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan on a Seat Leon

Model: Seat Leon 1M - Years 1999-2005
Part: Blower motor

In this useful video guide, you will see the entire procedure to remove the cabin fan from a first-generation Seat Leon. The fan is located behind the passenger side glove box, so to access it, you need to remove the glove box by unscrewing the screws that hold it in place and disconnecting the two connectors as shown in the video. Next, remove the fan power cable and then the lower fan cover by unscrewing its two screws. Once this is done, you can remove the old cabin fan and replace it with a new one by following the reverse procedure.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Fan in the Seat Leon?
How to Remove the Cabin Fan in the Seat Leon?
Seat Leon (1999-2005 / 1M) In this tutorial, we will see how to remove the cabin fan in the Seat Leon 1M, a very simple and quick operation. Since it is located behind the glov…
How do you turn off the air conditioner in the Seat Leon?
How do you turn off the air conditioner in the Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) It will be possible to turn off the air conditioning of the Seat Leon by turning on the instrument panel: once it has been activated, you can use the…
Where is the OBD port located on the Seat Leon 3?
Where is the OBD port located on the Seat Leon 3?
Seat Leon (2012-2019 / MK 3, 5F) The OBD port of your Seat Leon Mk3 is quite hidden, but fortunately you do not need to disassemble any interior component to be able to locate it. Yo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos