Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting a CD Player Radio

Model: Seat Ibiza 6K - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Car stereo

See other generations:
Video tutorial

Due to the delicacy of the work, it is recommended to carry out the operation by someone with a lot of experience in electronics. Remove the plastic radio panel by prying at the edges with a plastic tool.

Disconnect the electronic circuit from the panel, which should be kept, along with the various wiring, while keeping the control buttons in position. Extend all the wiring so that it can wrap around the radio that will be inserted.

Widen the hole in the console to accommodate the new radio. Install the new radio in the previously prepared housing.

Reassemble the electronics, isolating the bottom. Reassemble the panel and check the operation.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Removing the Car Radio for Repair
Removing the Car Radio for Repair
Seat Ibiza (2002-2009 / 6L) To remove the car radio from the console, insert the appropriate tools into the side slots of the radio to release the retaining springs. At this poi…
How to Add AUX, USB, and Bluetooth to an Old Car Radio
How to Add AUX, USB, and Bluetooth to an Old Car Radio
Seat Ibiza (1993-2002 / 6K) In this video, we see how to add AUX, USB, and Bluetooth to the radio of an old 2000 Seat Ibiza, but the procedure is roughly the same for all vehicl…
How to Remove the Radio from a Seat Ibiza
How to Remove the Radio from a Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) Is the radio in your Seat Ibiza to be replaced? Here’s how to remove it using removal keys. Use a plastic lever to detach the trim around the radio. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos