Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Seat Leon?

Model: Seat Leon KL1, KL8 - Years 2020-2026
Part:

Resetting the tyre pressure light on a Seat Leon, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that you have restored the correct pressure in each tyre following the instructions in the manual. Start by inserting the key and turning on the instrument panel, then, on the central touch screen, select the icon depicting a fuel pump. Next, enter the "Tyre Press." section and perform the reset using the "SET" option. Restart the vehicle afterwards to verify that the operation was successful.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor on the Seat Leon 2016
How to reset the tire pressure sensor on the Seat Leon 2016
Seat Leon (2012-2019 / MK 3, 5F) If the tire warning light continues to appear on the instrument panel of your 2016 Seat Leon despite the absence of a puncture or pressure loss, then…
How to reset the tire pressure light in the Seat Leon?
How to reset the tire pressure light in the Seat Leon?
Seat Leon (2020-2026 / KL1, KL8) In this tutorial we can see how to reset the tire pressure light in the Seat Leon, an extremely simple and quick operation, to be carried out only af…
How to Reset the Tyre Warning Light on Seat Leon?
How to Reset the Tyre Warning Light on Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) In this tutorial, we can see how to reset the tyre warning light on the Seat Leon, an extremely simple and quick operation, to be performed only afte…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos