Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Pump Relay Located on the Seat Leon?

Model: Seat Leon 1P - Years 2005-2013
Part: Fuel pump

The fuel pump relay on the Seat Leon is located inside the car's cabin, specifically behind the fuse box. In this video, there is a guide for right-hand drive, but for left-hand drive, the procedure is the same, just on the left side of the car. To access the position where you need to replace the fuel pump relay, first unscrew the screws holding the dash panel around the fuse box, then there are three more screws underneath, towards the floor of the car as shown in the video. Unscrew these as well to reveal the fuses. The relay you need is number 409. Replacing it is very simple. Remove the old one and insert the new one. It can be found online for around £5. To reassemble everything, follow the steps in reverse.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Seat Leon?
Where are the fuses located in the Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) Each fuse of the Seat Leon is located inside one of the two fuse boxes that are present inside the vehicle: the first is located inside the passenger…
Where Are the Fuses Located on a Seat Leon?
Where Are the Fuses Located on a Seat Leon?
Seat Leon (2005-2013 / 1P) On the Seat Leon, all fuses are divided between the two fuse boxes installed in the car: the first is located at the bottom left of the steering colu…
Where is the Fuse Box Located on a Seat Leon?
Where is the Fuse Box Located on a Seat Leon?
Seat Leon (2005-2013 / 1P) The Seat Leon has two fuse boxes: the first is located at the bottom left of the steering column. You need to remove the cover under the headlight ad…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos