Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuel Pump from Seat Ibiza and Volkswagen Polo

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Fuel pump

In this video, you will learn how to remove the fuel pump from the Seat Ibiza or Volkswagen Polo, both equipped with a 1.2 engine and 12 valves. In this type of vehicle, the fuel pump is located under the rear seats, so first, remove the seats. Once removed, you will see a circular plastic cap: detach the cap to access the pump. Disconnect the connector and remove the two fuel hoses (make sure to reconnect them correctly later): at this point, turn counter-clockwise to unscrew and extract the fuel pump!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Oil Pressure Sensor from a Seat Ibiza, Volkswagen Polo
Removing the Oil Pressure Sensor from a Seat Ibiza, Volkswagen Polo
Seat Ibiza (2002-2009 / 6L) In this very simple video tutorial, learn how to remove and clean the oil pressure sensor of a Seat Ibiza or Volkswagen Polo up to 2009. First, open …
How to Remove the Injectors from a Seat Ibiza or Volkswagen Polo
How to Remove the Injectors from a Seat Ibiza or Volkswagen Polo
Seat Ibiza (2002-2009 / 6L) In this video, you will see how to remove the injectors from a Seat Ibiza 1.2 (the same procedure applies to the Volkswagen Polo). First, open the bo…
Replacement of the timing belt of the Seat Ibiza 1.4 TSI
Seat Ibiza (2008-2017 / 6P, 6J) Today's main instructions will show us how to dismantle and replace the timing belt of the Seat Ibiza 1.4 TSI, as well as the Volkswagen Polo and Gol…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos