Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Injectors from a Seat Ibiza or Volkswagen Polo

Model: Seat Ibiza 6L - Years 2002-2009
Part: Fuel injectors

In this video, you will see how to remove the injectors from a Seat Ibiza 1.2 (the same procedure applies to the Volkswagen Polo). First, open the bonnet and remove the plastic engine cover: disconnect the injector cables in front of you; to do this, use a Torx key to unscrew the screws of the metal bar to remove them. Once the connectors are detached, pull out the entire block to also remove the injectors (there are three as this car's engine is a three-cylinder). The injectors will be held by a clip which you will release with a screwdriver, and that's it!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Ibiza (2008-2017 / 6P, 6J) In this video, you will learn how to remove the fuel pump from the Seat Ibiza or Volkswagen Polo, both equipped with a 1.2 engine and 12 valves. In t…
Seat Ibiza (2002-2009 / 6L) In this very simple video tutorial, learn how to remove and clean the oil pressure sensor of a Seat Ibiza or Volkswagen Polo up to 2009. First, open …
Seat Ibiza (2008-2017 / 6P, 6J) How to remove the mirror glass on a Seat Ibiza? Follow these steps: using a lever (plastic or rubber), pry between the edge of the mirror frame and t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos