Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Seat Ibiza?

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the cabin filter in the Seat Ibiza, a task that is extremely simple and quick. First, position yourself in the passenger seat, then go underneath the dashboard and locate the long rectangular cover situated at the junction between the centre tunnel and the dashboard itself.

Next, open the cover by unlocking the relevant retaining clip, extract the old filter, and clean the housing of any dirt residue. At this point, insert the replacement and reassemble everything by following the reverse procedure.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Seat Ibiza?
How to Replace the Cabin Filter on a Seat Ibiza?
Seat Ibiza (2017-2026 / KJ, 6F) To replace the cabin filter on a Seat Ibiza, remove the section of carpet between the footwell and the glove compartment on the passenger side. By re…
How to replace the cabin filter in the Seat Ibiza?
How to replace the cabin filter in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) .. In this tutorial, you will see how to replace the cabin filter in the Seat Ibiza, a very simple and quick operation. First, go to the.. …
How to replace the cabin filter on the Seat Ibiza
How to replace the cabin filter on the Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To replace the cabin filter on the Seat Ibiza, start by going under the dashboard (behind the glove compartment), where there is a rectangular cover.…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos