Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Seat Mii - Volkswagen Up.

Model: Seat Mii MK 1 - Years 2011-2021
Part: Headlight bulb

Today's steps will show us how to disassemble and replace the headlight bulb of the Seat Mii, as well as the Volkswagen Up. First, we open the car's hood and start by removing the plastic cover found behind the headlight; then we disconnect the electrical connector and release the metal clip to remove the bulb from the headlight assembly, as shown in the video. At this point, we install the new low beam and high beam bulb, with the same fitting; we make the connection and finally reassemble the plastic cover!

Posted on 15 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning light on the Seat Mii - Volkswagen Up - Skoda Citigo
Resetting the tire pressure warning light on the Seat Mii - Volkswagen Up - Skoda Citigo
Seat Mii (2011-2021 / MK 1) In simple and quick steps, we will see how to reset the tire pressure warning light (TPMS) of the Seat Mii, as well as the Volkswagen Up and Skoda Ci…
How do you replace the timing belt of the Seat Mii?
How do you replace the timing belt of the Seat Mii?
Seat Mii (2011-2021 / MK 1) In order to replace the timing belt of the Seat Mii, you need to lift the car with a jack so that the right front wheel is not in contact with the gr…
Positioning and fuse diagram of the Seat Mii - Volkswagen Up - Skoda Citigo.
Positioning and fuse diagram of the Seat Mii - Volkswagen Up - Skoda Citigo.
Seat Mii (2011-2021 / MK 1) Today we will discover the guide that will allow us to identify the positioning and layout of the fuses in the Seat Mii, as well as the Volkswagen Up…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos