Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Seat Mii?

Model: Seat Mii MK 1 - Years 2011-2021
Part: Timing belt

In order to replace the timing belt of the Seat Mii, you need to lift the car with a jack so that the right front wheel is not in contact with the ground: once the wheel bolts have been loosened, it will be possible to remove it together with the inner lining of its wheel arch. This will allow access to the central nut that secures the belt tensioner roller, which can then be removed by pulling the belt from its housing; after removal, it will be possible to insert the new belt around the pulleys, verifying that everything works.

Posted on 25 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Seat Mii?
How to Reset the Service Light on a Seat Mii?
Seat Mii (2011-2021 / MK 1) The procedure to reset the service light on a Seat Mii takes only a few seconds. As shown by the creator of this video, seated in a 2013 Seat Mii, to…
How to Set the Clock on Seat Mii
How to Set the Clock on Seat Mii
Seat Mii (2011-2021 / MK 1) In this short guide, you will learn how to adjust the clock on the instrument panel display of the Seat Mii, as well as the Volkswagen Up and Skoda C…
How do you reset the Service light on the Seat Mii?
How do you reset the Service light on the Seat Mii?
Seat Mii (2011-2021 / MK 1) The operation of resetting the Service light on the Seat Mii requires inserting the ignition key and turning it to turn on the instrument panel witho…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos