Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Seat Ibiza: How to Replace the Timing Belt on the Petrol Engine

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on the Seat Ibiza, start by raising the front right side of the car, removing the wheel, and taking off the inner wheel arch lining by unscrewing the screws that secure it to the bumper and the chassis. This will give you access to the lower timing covers.

In the engine bay, clear the area around the timing side and remove the aluminium engine mount, working only when the engine is properly supported. Once the plastic covers are removed, set the engine to the correct timing and lock the camshafts with the appropriate alignment tools inserted into the pulleys; also align the mark on the crankshaft.

Loosen the tensioner, slide off the old belt, and replace the tensioner and guide pulleys with the new components from the kit. Fit the new belt, ensuring the correct routing and keeping the tension side taut; then adjust the tensioner until the tension indicator falls within the specified range.

Manually rotate the engine a few complete turns and check that the timing marks still align.

When you are confident of the alignment, refit the covers, engine mount, wheel arch lining, and wheel, then lower the Seat Ibiza to the ground and start the engine to check the smooth operation of the new timing belt.


Posted on 22 May 2026 by ScegliAuto


Related tutorials

How and When to Replace the Timing Belt on a Seat Ibiza 1.0 TSI
How and When to Replace the Timing Belt on a Seat Ibiza 1.0 TSI
Seat Ibiza (2008-2017 / 6J, 6P) Below are the main instructions for removing and replacing the timing belt on a Seat Ibiza 1.0 TSI, as well as on a Volkswagen Polo. This type of eng…
Replacing the Timing Belt on the Seat Ibiza 1.0 MPI
Replacing the Timing Belt on the Seat Ibiza 1.0 MPI
Seat Ibiza (2008-2017 / 6J, 6P) Below are the steps to remove and replace the timing belt on the Seat Ibiza 1.0 MPI. First, lift the vehicle and start by removing the front right wh…
How to Replace the Timing Belt on a Seat Ibiza?
How to Replace the Timing Belt on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) To replace the timing belt on a Seat Ibiza, open the bonnet to access the components inside the engine bay. On the left side of the engine block, you…

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos