Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Timing Belt on the Seat Ibiza 1.0 MPI

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

Below are the steps to remove and replace the timing belt on the Seat Ibiza 1.0 MPI. First, lift the vehicle and start by removing the front right wheel, then disconnect the auxiliary belt; next, remove the crankshaft pulley, as shown in the video. At this point, remove the air filter box by disconnecting the intake hose and the mass airflow sensor pipe; remove the timing cover to access the timing belt and proceed with its replacement.


Posted on 12 September 2026 by ScegliAuto


Related tutorials

Seat Ibiza (2008-2017 / 6J, 6P) Today's main instructions will show you how to remove and replace the timing belt on the Seat Ibiza 1.4 TSI, as well as on the Volkswagen Polo and Go…
Seat Ibiza (2008-2017 / 6J, 6P) Below are the main instructions for removing and replacing the timing belt on a Seat Ibiza 1.0 TSI, as well as on a Volkswagen Polo. This type of eng…
Seat Ibiza (2002-2009 / 6L) Start by unclipping and removing the upper engine cover of your Seat Ibiza. Once done, unclip and remove the cover for the auxiliary belt and timing …

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos