Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Mii?

Model: Seat Mii MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

Video tutorial

The procedure to reset the service light on a Seat Mii takes only a few seconds. As shown by the creator of this video, seated in a 2013 Seat Mii, to perform the reset, you need to locate and hold down the '0.0/SET' button found on the right side of the instrument panel.

While holding it down, turn the key to switch on the panel and wait a few seconds, then release the button and press it again once, without holding it down. Turn off the panel and turn it back on to verify that the light has been successfully reset.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Seat Mii?
How to Reset the Service Light on a Seat Mii?
Seat Mii (2011-2021 / MK 1) .. In this tutorial, see how to reset the service light on a Seat Mii, a very simple and quick operation that should only be done.. …
How to Reset the Service Light on a Seat Mii?
How to Reset the Service Light on a Seat Mii?
Seat Mii (2011-2021 / MK 1) To reset the Service light on a Seat Mii, insert the ignition key and turn it to activate the instrument panel without starting the engine. Once the …
How to reset the Service light on the Seat Mii?
How to reset the Service light on the Seat Mii?
Seat Mii (2011-2021 / MK 1) To reset the Service light on the Seat Mii, press and hold the 0.0/SET button located on the right side of the instrument cluster while it is off. Co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos