Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil of the Sherco SEF 300?

Model: Sherco Sef 300
Part: Engine oil

Video tutorial

You can replace the engine oil of the Sherco SEF 300 by accessing the central lower part of the vehicle, where the oil drain plug is located. This can be unscrewed with a suitable spanner after removing the cover plate: all the used oil should be collected in a container.

After all the oil has drained out, you will need to unscrew the screws that secure the cover on the left side of the bike to extract the oil filter located underneath. Once replaced, you can seal the cover and the drain plug, pouring in the new oil through the breather located on the right side of the vehicle.


Posted on 21 May 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Sef 300 Here are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sherco SEF 300 enduro…
How to Change the Engine Oil on the Sherco SEF 300?
How to Change the Engine Oil on the Sherco SEF 300?
Sef 300 To change the engine oil on the Sherco SEF 300, access the central lower part of the bike where the oil drain plug is located. This can be unscrewed …
How to Change the Engine Oil of the Sherco SEF 300
How to Change the Engine Oil of the Sherco SEF 300
Sef 300 To change the engine oil of the Sherco SEF 300, access the central lower part of the bike, where the oil drain plug is located. This can be unscrewed…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos