Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Sef 300
Part: Engine oil

The oil change on the Sherco SEF 300 is done by accessing the central lower part of the motorcycle, where the oil tank drain plug is located. This can be unscrewed with a special key after removing the engine guard plate, and all the used oil must be collected in a properly positioned container. Once the oil has completely drained, the screws securing the left side engine casing should be loosened to remove the oil filter located under the casing. Once it has been replaced, the casing and drain plug can be closed, and the new oil can be poured through the refill hole located on the right side of the vehicle.


Posted on 24 November 2023 by ScegliAuto

How to remove and replace the front wheel of the Honda Nc 750X

Today we will see, in this short and simple guide, how to disassemble and replace the front wheel of the Honda Nc 750X motorcycle. First of all we put our bike on the central stand and we start to unscrew the fixing screws of the front brake caliper, in order to remove it from the disc; let's then loosen the central pin of the wheel, using a socket wrench, as shown in the video. At this point we lift the wheel from the ground with a jack or front stand; remove the pin and replace the wheel, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos