Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Citigo
    4. : Instrument cluster

Skoda Citigo - Instrument cluster

Skoda Citigo (2011-2020 / MK 1)
How to set the time on the Skoda Citigo
If the wrong time is displayed on the dashboard of your Skoda Citigo and you want to find out how to manually change it, all you have to do is read the …read all…
Posted on 12 December 2023 by ScegliAuto
Skoda Citigo (2011-2020 / MK 1)
To reset the service in the Skoda Citigo.
In today's video, we will see how to proceed to reset the service indicator in the Skoda Citigo. This tutorial also applies to its twins, the Seat Mii and …read all…
Posted on 9 October 2023 by ScegliAuto
Skoda Citigo (2011-2020 / MK 1)
How to reset the service light of the Skoda Citigo 2015
If you have just had your 2015 Skoda Citigo serviced and you also need to restore the relative warning light, then all you have to do is follow the …read all…
Posted on 27 May 2023 by ScegliAuto
Skoda Citigo (2011-2020 / MK 1)
How to set the timetable of the Skoda Citigo 2015
If on the panel of your 2015 Skoda Citigo you see a different time from the correct one and you want to change it manually, then all you have to do is put into …read all…
Posted on 6 November 2022 by ScegliAuto
Battery (1) Spark plugs (1) Checks and maintenance (10) Tail light (1) Cabin air filter (2) Instrument cluster (4) Fuse box (16) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos