Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Badge on a Skoda

Model: Skoda Octavia 1Z, MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Manufacturer emblem

See other generations:
Video tutorial

For this particular operation, simply equip yourself with the appropriate tools. You can pull off the badge by attaching pieces of insulating tape to the areas where you will apply leverage, to avoid damaging the bodywork of your vehicle.

Once the tools are inserted at the back of the badge, apply a simple lever to extract the badge, which is attached with adhesive. To fit the new piece, you must remove any residual adhesive and properly clean the area where you will mount the new badge.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Change the Manufacturer's Badge on the Skoda Octavia
How to Change the Manufacturer's Badge on the Skoda Octavia
Skoda Octavia (1996-2004 / MK 1, 1U) These brief steps will show you how to remove and replace the manufacturer's badge on the Skoda Octavia. First, move to the front of the vehicle and …
How to Replace the Standard Badge with a Black One on a Skoda Octavia
How to Replace the Standard Badge with a Black One on a Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Learn how to replace the original Skoda emblem with a black one. To remove it, heat the old badge while protecting the paint around it with masking t…
How to Replace the Front Badge on a Škoda Octavia?
How to Replace the Front Badge on a Škoda Octavia?
Skoda Octavia (2004-2012 / 1Z, MK 2) To replace the front badge on a Škoda Octavia, use a tool like a screwdriver to lever the manufacturer's symbol away from its housing: you will need …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos