Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the AdBlue warning light on the Škoda Kamiq?

Model: Skoda Kamiq MK 1 - Years 2018-2026
Part: AdBlue warning light

In order to reset the AdBlue warning light on the Škoda Kamiq, you need to perform a refill by adding the necessary amount of additional liquid to the tank: to perform the refill, you will need to open the fuel door, located at the rear of the car. Under the fuel door, there will be a blue cap that needs to be removed in order to add the necessary amount of additional liquid to fill the tank: at this point, you can close the blue cap and ensure that everything is functioning correctly.

Posted on 20 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Skoda Kamiq (2018-2026 / MK 1) You can completely clear the Service light on the Škoda Kamiq by turning on the ignition and then pressing the button on the right spoke of the steer…
Skoda Kamiq (2018-2026 / MK 1) To reset the Service light on a Škoda Kamiq, turn on the instrument cluster and then press and hold the button located on the right spoke of the stee…
Skoda Kamiq (2018-2026 / MK 1) To reset the Service light on a Škoda Kamiq, first turn on the ignition. Then, press and hold the button located on the right side of the steering wh…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos