Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Skoda Rapid

Model: Skoda Rapid MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bumper

Video tutorial

To remove the rear bumper of the Skoda Rapid, start by opening the tailgate and releasing the plastic profile next to the taillight. Unscrew the two Torx screws that you find and remove the taillight after disconnecting the electrical connector.

Repeat the operation on the other taillight. Unscrew the three Torx screws that you find inside both wheel arches and partially release the bumper.

Proceed to unscrew the Torx screws located on the lower edge, once this operation is completed, we can release the bumper starting from one side, lay it on the ground and disconnect the various electrical connectors to remove it permanently.


Posted on 6 March 2025 by ScegliAuto


Related tutorials

Replacing the External Mirror Glass on Skoda Rapid
Skoda Rapid (2012-2019 / MK 1) In today's tutorial, you will briefly see how to remove and replace the glass of the external rear-view mirror on a Skoda Rapid, following these simp…
Removing the Panel on a Skoda Rapid
Removing the Panel on a Skoda Rapid
Skoda Rapid (2012-2019 / MK 1) Remove the door cover panel on the Rapid for maintenance. Take off the cover of the inner handle using a plastic trim tool. Unscrew the screws locate…
How to Reset the Service on the Skoda Rapid?
How to Reset the Service on the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) Resetting the service on the Skoda Rapid, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure all schedu…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos