Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the Skoda Fabia MK2

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

We can see in this video how to reset the maintenance light of the Skoda Fabia MK2: we must always make sure, before performing this operation, that all doors, the rear trunk, and the front hood are properly closed. We get into the car without turning on the instrument panel, and we press and hold down the partial kilometers button, located in the center of the dashboard, marked with a "0.0". While holding down the button, we turn on the instrument panel, wait a few more seconds, and then release the button.

At this point, the light turns off. To confirm, we turn off the instrument panel and then turn it back on for verification.


Posted on 15 November 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2008 Skoda Fabia?
How to Reset the Service Light on the 2008 Skoda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) Before the aforementioned Reset, it is important to highlight the necessary routine maintenance that must be performed. In this video, we see the oil…
Resetting the Service Light on a Skoda Fabia
Resetting the Service Light on a Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Below are the instructions on how to reset the maintenance warning light on the Skoda Fabia. First, get into the vehicle and turn on the ignition. Th…
How to reset the service light on the Skoda Fabia
How to reset the service light on the Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) If you want to carry out the procedure through which you can reset the service light of your Skoda Fabia by yourself, all you have to do is follow th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos