Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the 2013 Skoda Superb.

Model: Skoda Superb B6, 3T - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter in your Skoda Superb (2013 model) is very simple, and to complete the operation, you just need to follow the procedure described in the following guide. First, get into the car and reach the front passenger seat, then proceed to remove the protective panel located at the bottom of the glove compartment.

Once that is done, locate the box that contains the air filter and remove the cover, then pull out the old filter and replace it with a new one. Finally, reassemble the components you removed earlier, and you’re done.


Posted on 4 December 2025 by ScegliAuto


Related tutorials

How to change the air filter of the 2013 Skoda Superb
How to change the air filter of the 2013 Skoda Superb
Skoda Superb (2008-2015 / B6, 3T) To safeguard the life and performance of the engine of your Skoda Superb (2013), you need to periodically replace the engine air filter. In the follo…
How to Remove the Cabin Air Filter on a Skoda Superb
How to Remove the Cabin Air Filter on a Skoda Superb
Skoda Superb (2015-2023 / 3V, B8) Let’s see how to remove the cabin air filter on a Skoda Superb: Open the glove compartment and unclip the plastic guides. Rotate the glove compartmen…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Skoda Superb (2008-2015 / B6, 3T) To replace the cabin air filter, you need to access the engine compartment as the filter housing is located just below the windscreen, underneath the…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos