Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Skoda Superb B6, 3T - Years 2008-2015
Part: Cabin air filter

To replace the cabin air filter, you need to access the engine compartment as the filter housing is located just below the windscreen, underneath the plastic panel secured by the edge of the seal: first, remove the seal that secures the plastic panel, then remove the panel itself and locate the cabin air filter; unclip the securing latch, extract the old filter, ensure there are no dirt residues inside the housing and remove them if necessary, insert the new filter respecting the airflow direction and reassemble the securing latch, the plastic panel, and the seal. Cleaning the cabin air filter is essential to ensure the health and hygiene of the cabin.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the 2013 Skoda Superb.
How to replace the cabin air filter of the 2013 Skoda Superb.
Skoda Superb (2008-2015 / B6, 3T) .. Replacing the cabin air filter in your Skoda Superb (2013 model) is very simple, and to complete the.. …
Replacement of Engine Air Filter
Replacement of Engine Air Filter
Skoda Superb (2008-2015 / B6, 3T) You can change the air filter of a car without needing to go to an authorised workshop. The following guide shows you how to do it. First, open the b…
How to change the air filter of the 2013 Skoda Superb
How to change the air filter of the 2013 Skoda Superb
Skoda Superb (2008-2015 / B6, 3T) To safeguard the life and performance of the engine of your Skoda Superb (2013), you need to periodically replace the engine air filter. In the follo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos