Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diesel Filter Replacement Instructions

Model: Skoda Superb B6, 3T - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Diesel fuel filter

See other generations:
Video tutorial

The diesel filter is located at the rear of the engine bay, near the coolant reservoir: to replace it, simply unscrew the fastening clip pin located on the side (the position is a bit awkward, but you can manage with a small ratchet); once the filter is free, disconnect the hoses attached to it by opening the fastening clips with pliers or the appropriate tool and remove the cotter pin from the T-connector; then remove the old filter and install the new one in reverse order, inserting the new O-ring gasket on the T-connector: it is helpful to fill the filter with clean diesel before installing it to facilitate the first start.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Skoda Superb (2008-2015 / B6, 3T) To replace the cabin air filter, you need to access the engine compartment as the filter housing is located just below the windscreen, underneath the…
Replacement of Engine Air Filter
Replacement of Engine Air Filter
Skoda Superb (2008-2015 / B6, 3T) You can change the air filter of a car without needing to go to an authorised workshop. The following guide shows you how to do it. First, open the b…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Skoda Superb (2008-2015 / B6, 3T) To change the oil and access the sump more easily, lift the vehicle on suitable axle stands; then remove the plastic cover from the engine. Position …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos