Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Engine Air Filter

Model: Skoda Superb B6, 3T - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Air filter

See other generations:
Video tutorial

You can change the air filter of a car without needing to go to an authorised workshop. The following guide shows you how to do it. First, open the bonnet; a black hard plastic compartment will appear, which contains the filter.

Remove it by undoing the 6 bolts. At this point, simply remove the old filter, taking care to note the orientation for the new one. It should fit correctly into the designated area, ensuring that you re-tighten the 6 bolts in their proper places, and the job is complete.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Skoda Superb (2008-2015 / B6, 3T) To replace the cabin air filter, you need to access the engine compartment as the filter housing is located just below the windscreen, underneath the…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Skoda Superb (2008-2015 / B6, 3T) To change the oil and access the sump more easily, lift the vehicle on suitable axle stands; then remove the plastic cover from the engine. Position …
How to replace the fuel filter of the Skoda Superb TDI
How to replace the fuel filter of the Skoda Superb TDI
Skoda Superb (2015-2023 / 3V, B8) Let's see how to replace the diesel filter on a Skoda Superb TDI: the fuel system is pressurized, so it must be depressurized before working on it; d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos