Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Number Plate Bulb on a Skoda Octavia

Model: Skoda Octavia MK 2, 1Z - Years 2004-2012
Part: License plate light

Replacing the number plate bulbs on a Skoda Octavia. In this video, we will see how to replace the damaged bulbs. Open the boot lid and use a screwdriver to unscrew the screws of the plastic light fitting located in the rear hatch of the car. Once the light fitting is removed, pull out the holder with your fingers, then remove the bulb from it. Fit the new bulb (same size and voltage) into the holder, then refit the light fitting into the metal of the hatch. Finally, test the correct operation of the previously fitted bulbs.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Number Plate Bulbs on a Skoda Octavia
Replacing the Number Plate Bulbs on a Skoda Octavia
Skoda Octavia (2012-2019 / MK 3, 5E) Learn how to replace the number plate bulb on a Skoda Octavia. Open the boot and unscrew the two small screws clearly shown in the video. These screw…
How to Change the Front Headlight Bulb on a Skoda Octavia
How to Change the Front Headlight Bulb on a Skoda Octavia
Skoda Octavia (2004-2012 / MK 2, 1Z) Let's see how to change the front headlight bulbs on a Skoda Octavia. Open the bonnet by pulling the lever located at the bottom right of the dashboa…
How to Replace the Number Plate Light Bulbs on a Skoda Octavia?
How to Replace the Number Plate Light Bulbs on a Skoda Octavia?
Skoda Octavia (2004-2012 / MK 2, 1Z) In this tutorial, you will see how to replace the number plate light bulbs on a Skoda Octavia, a very simple task. First, ensure the vehicle is turne…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos