Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Octavia
  6. : License plate light

Skoda Octavia - License plate light

Skoda Octavia (2004-2012 / MK 2, 1Z)
Replacement of the license plate light bulb on the Skoda Octavia.

The main steps today will show us how to easily dismantle and replace the license plate bulbs of the Skoda Octavia. First, let's move to the rear of the car …read all…
Posted on 6 February 2024 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
How to change the license plate light on the Skoda Octavia 2?

The license plate light of the Skoda Octavia 2 is easily replaceable when burnt out because the ceiling light is easily accessible and the replacement only …read all…
Posted on 4 November 2023 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
How to replace the license plate light bulbs in the Skoda Octavia?

In this tutorial we can see how to replace the license plate light bulbs in the Skoda Octavia, very simple operation. First of all, let's make sure that the …read all…
Posted on 28 July 2022 by ScegliAuto
Skoda Octavia (2012-2019 / MK 3, 5E)
Replacing license plate bulbs on Skoda Octavia

Today we will show you how to replace the bulb that illuminates the license plate on Skoda Octavia. Open the boot lid and unscrew the two small screws shown in …read all…
Posted on 21 February 2024 by ScegliAuto
Skoda Octavia (2012-2019 / MK 3, 5E)
How to replace the number plate light bulbs on Å koda Octavia 3rd series

Replacing the license plate light bulbs on the Å koda Octavia 3 series is a fairly simple operation as the sockets feature an easily operated spring release. …read all…
Posted on 15 February 2024 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
How to change the license plate bulb on Skoda Octavia

Replacing the license plate bulbs of a Skoda Octavia. Let's see in this video how to replace damaged bulbs. We open the hood of the luggage compartment, with a …read all…
Posted on 28 November 2023 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
Car license plate light replacement

The license plate lights are indeed an indispensable part of the car. Of course, the two small license plate lights can also burn out, like all light bulbs. …read all…
Posted on 12 September 2023 by ScegliAuto

Cigarette Lighter (3) Airbags (5) Alternator (1) Shock absorbers (1) Car stereo (15) Battery (8) Air Vents (2) Gearbox (1) Spark plugs (2) Glow plugs (2) Glove box (4) Key (30) Timing belt (4) Air conditioning (5) -board computer (12) Checks and maintenance (69) Oil pan (1) Dashboard (3) Bearing (1) Brake discs (1) Rear bench seat (1) Headlight (5) Tail light (6) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel filter (4) Oil filter (3) Clutch (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Side turn signal light bulb (1) Headlight bulb (19) Rear light bulb (4) Dashboard light (1) License plate light (7) Third brake light (1) Handle (4) Engine oil (3) Door panel (16) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (4) Fuel pump (2) Door (2) Instrument cluster (23) Radiator (1) Passenger compartment heating radiator (3) Fuse box (29) Seat (6) Drive shaft (1) Coolant temperature sensor (1) Lock (4) Suspensions (1) Outside rearview mirror (5) Manufacturer's coat of arms (3) Drums and shoes (1) Windscreen wipers (3) Thermostat (1) Steering rods (1) Turbine (1) Interior blower (3) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos