Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Octavia
  6. : EGR valve

Skoda Octavia - EGR valve

EGR Valve Skoda Octavia (2004-2012 / mk 2, 1z)

Skoda Octavia (2004-2012 / MK 2, 1Z)
How to Replace the EGR Valve on a Skoda Octavia II Diesel?

Let's see how to replace the EGR valve on a Skoda Octavia diesel: it is located at the top left of the engine bay, and symptoms of malfunction include loss of …Read all…
Posted on 18 May 2026 by ScegliAuto

Cigarette lighter (3) Airbag (8) Alternator (4) Shocks (2) Antenna (1) Car stereo (12) Battery (11) Air vents (3) Transmission (2) Spark plugs (2) Glow plugs (4) Body (1) Glove compartment (7) Key (54) Timing belt (7) Air conditioner (13) Onboard computer (7) Checks and maintenance (26) Dashboard (1) Shifter boot (1) Bearing (1) Brake rotors (1) Rear bench seat (1) Headlight (12) Tail light (9) Fog lights (6) Air filter (7) Cabin air filter (14) Diesel fuel filter (4) Oil filter (3) Parking brake (3) Clutch (1) Window switch (2) Accessory kit (3) Light bulb (7) Side marker bulb (1) Headlight bulb (31) Tail light bulb (4) Instrument panel light (1) License plate light (7) (1) Handle (4) Power window motor (1) Engine oil (3) Clock (25) Door trim panel (19) Front bumper (4) Rear bumper (2) Brake pads (4) Shift knob (1) Fuel pump (2) Car door (4) Instrument cluster (9) Radiator (1) Heater core (5) Fuse box (61) Seat (10) Axle shaft (1) Engine coolant temperature sensor (3) Door lock (5) Suspension system (1) Side mirror (8) AdBlue warning light (4) Warning light – error code (39) Tire pressure warning light (45) Service warning light (183) Manufacturer emblem (5) Brake drums and shoes (1) Fuel cap (2) Windshield wipers (3) Thermostat (1) Tie rods (1) Turbocharger (1) EGR valve (1) Blower motor (3) Side window (2) Steering wheel (1)

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos