Do it yourself
| ||||
|
Skoda Octavia - Brake pads
Skoda Octavia (2004-2012 / MK 2, 1Z)
How to replace rear brake pads on Skoda Octavia 2 Thanks to these simple steps we can easily and do-it-yourself replace the rear brake pads on a second series Skoda Octavia. First we lift the car and we go to …read all… Posted on 15 January 2024 by ScegliAuto
Skoda Octavia (1996-2004 / 1U, MK 1)
How to register the brake pads on Skoda Octavia Have the tablets of our Skoda Octavia reached the end of their life? Let's see how to change them in the back. We lift the car on a column bridge up to the …read all… Posted on 1 December 2023 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
How to replace the rear brake pads on Skoda Octavia Replacing the brake pads is certainly a maintenance that can be done do-it-yourself but you must pay close attention since the brakes certainly represent an …read all… Posted on 4 October 2023 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
Replacement of front brake pads To replace the front brake pads, lift the car on suitable car stands and remove the front wheel; therefore disconnect the wear sensor socket, remove the …read all… Posted on 14 September 2023 by ScegliAuto Cigarette Lighter (3) Airbags (5) Alternator (1) Shock absorbers (1) Car stereo (15) Battery (8) Air Vents (2) Gearbox (1) Spark plugs (2) Glow plugs (2) Glove box (4) Key (30) Timing belt (4) Air conditioning (5) -board computer (12) Checks and maintenance (69) Oil pan (1) Dashboard (3) Bearing (1) Brake discs (1) Rear bench seat (1) Headlight (5) Tail light (6) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel filter (4) Oil filter (3) Clutch (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Side turn signal light bulb (1) Headlight bulb (19) Rear light bulb (4) Dashboard light (1) License plate light (7) Third brake light (1) Handle (4) Engine oil (3) Door panel (16) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (4) Fuel pump (2) Door (2) Instrument cluster (23) Radiator (1) Passenger compartment heating radiator (3) Fuse box (29) Seat (6) Drive shaft (1) Coolant temperature sensor (1) Lock (4) Suspensions (1) Outside rearview mirror (5) Manufacturer's coat of arms (3) Drums and shoes (1) Windscreen wipers (3) Thermostat (1) Steering rods (1) Turbine (1) Interior blower (3) Side window (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |