Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Octavia
  6. : Timing belt

Skoda Octavia - Timing belt

Skoda Octavia (2012-2019 / MK 3, 5E)
How do you replace the timing belt of the Škoda Octavia?

In order to replace the timing belt of the Škoda Octavia, you need to lift the car by loosening the screws that secure the front right wheel and also removing …read all…
Posted on 13 May 2024 by ScegliAuto
Skoda Octavia (2012-2019 / MK 3, 5E)
When and how to replace the timing belt of the Skoda Octavia 1.6 TDI

The information provided in this guide will show us how and when to replace the timing belt of the Skoda Octavia 1.6 TDI and all other Volkswagen Group …read all…
Posted on 28 February 2024 by ScegliAuto
Skoda Octavia (2012-2019 / MK 3, 5E)
Instructions for replacing the timing belt on the Skoda Octavia 1.6 TDI.

If we need to proceed with the replacement of the timing belt on this car model, in the description reported below we will find general and approximate …read all…
Posted on 4 April 2023 by ScegliAuto
Skoda Octavia (1996-2004 / 1U, MK 1)
How to replace the timing belt on Skoda Octavia 1.9 tdi

To change the timing belt of the Skoda Octavia 1.9 Tdi, we operate as follows: in the video the engine has been disassembled and placed on a special trolley …read all…
Posted on 5 April 2024 by ScegliAuto

Cigarette Lighter (3) Airbags (5) Alternator (1) Shock absorbers (1) Car stereo (15) Battery (8) Air Vents (2) Gearbox (1) Spark plugs (2) Glow plugs (2) Glove box (4) Key (30) Timing belt (4) Air conditioning (5) -board computer (12) Checks and maintenance (69) Oil pan (1) Dashboard (3) Bearing (1) Brake discs (1) Rear bench seat (1) Headlight (5) Tail light (6) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel filter (4) Oil filter (3) Clutch (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Side turn signal light bulb (1) Headlight bulb (19) Rear light bulb (4) Dashboard light (1) License plate light (7) Third brake light (1) Handle (4) Engine oil (3) Door panel (16) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (4) Fuel pump (2) Door (2) Instrument cluster (23) Radiator (1) Passenger compartment heating radiator (3) Fuse box (29) Seat (6) Drive shaft (1) Coolant temperature sensor (1) Lock (4) Suspensions (1) Outside rearview mirror (5) Manufacturer's coat of arms (3) Drums and shoes (1) Windscreen wipers (3) Thermostat (1) Steering rods (1) Turbine (1) Interior blower (3) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos