Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Octavia
  6. : Passenger compartment heating radiator

Skoda Octavia - Passenger compartment heating radiator

Skoda Octavia (2004-2012 / MK 2, 1Z)
How to replace the cabin heating radiator of the Skoda Octavia.

The instructions provided in this guide will show us how to disassemble and replace the heater radiator of the Skoda Octavia. First, we get inside the cabin, …read all…
Posted on 5 February 2024 by ScegliAuto
Skoda Octavia (1996-2004 / 1U, MK 1)
How do I replace the heating radiator on the Å koda Octavia?

In order to replace the heating radiator of the Å koda Octavia you have to completely disassemble the dashboard: you have to start by removing the front …read all…
Posted on 6 September 2022 by ScegliAuto
Skoda Octavia (2012-2019 / MK 3, 5E)
How do you replace the heat exchanger on the Å koda Octavia?

In order to replace the heat exchanger of the Å koda Octavia, the entire central panel must be disassembled by removing the special plastic covers. Under …read all…
Posted on 20 July 2022 by ScegliAuto

Cigarette Lighter (3) Airbags (5) Alternator (1) Shock absorbers (1) Car stereo (15) Battery (8) Air Vents (2) Gearbox (1) Spark plugs (2) Glow plugs (2) Glove box (4) Key (30) Timing belt (4) Air conditioning (5) -board computer (12) Checks and maintenance (69) Oil pan (1) Dashboard (3) Bearing (1) Brake discs (1) Rear bench seat (1) Headlight (5) Tail light (6) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel filter (4) Oil filter (3) Clutch (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Side turn signal light bulb (1) Headlight bulb (19) Rear light bulb (4) Dashboard light (1) License plate light (7) Third brake light (1) Handle (4) Engine oil (3) Door panel (16) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (4) Fuel pump (2) Door (2) Instrument cluster (23) Radiator (1) Passenger compartment heating radiator (3) Fuse box (29) Seat (6) Drive shaft (1) Coolant temperature sensor (1) Lock (4) Suspensions (1) Outside rearview mirror (5) Manufacturer's coat of arms (3) Drums and shoes (1) Windscreen wipers (3) Thermostat (1) Steering rods (1) Turbine (1) Interior blower (3) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos