Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : Handle

Skoda Octavia - Handle

Skoda Octavia (2012-2019 / MK 3, 5E)
How do you remove the external handle of the Škoda Octavia?
In order to remove the external handle of the Škoda Octavia, you need to open the corresponding door so that you can access the hole located in this position: …read all…
Posted on 28 April 2024 by ScegliAuto
Skoda Octavia (2012-2019 / MK 3, 5E)
How to remove the rear handle of the Skoda Octavia
Replacing the rear handle of the Skoda Octavia is a very simple action. The first thing to do is to remove the door panel, once removed we can easily reach the …read all…
Posted on 21 March 2024 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
Replace Skoda Octavia handles
How to disassemble the exterior handle of the Skoda Octavia? Let's see briefly how to remove the handle and how to remove it from the door housing. Remove the …read all…
Posted on 20 January 2024 by ScegliAuto
Skoda Octavia (2012-2019 / MK 3, 5E)
How to remove the outside handle of the Skoda Octavia
If you want to remove the external opening handle on the door, you do not have to remove the internal trim panel first; in fact, once the door is opened, on …read all…
Posted on 23 September 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (5) Alternator (1) Shock absorbers (1) Car stereo (15) Battery (8) Air Vents (2) Gearbox (1) Spark plugs (2) Glow plugs (2) Glove box (4) Key (30) Timing belt (4) Air conditioning (5) -board computer (12) Checks and maintenance (69) Oil pan (1) Dashboard (3) Bearing (1) Brake discs (1) Rear bench seat (1) Headlight (5) Tail light (6) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel filter (4) Oil filter (3) Clutch (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Side turn signal light bulb (1) Headlight bulb (19) Rear light bulb (4) Dashboard light (1) License plate light (7) Third brake light (1) Handle (4) Engine oil (3) Door panel (16) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (4) Fuel pump (2) Door (2) Instrument cluster (23) Radiator (1) Passenger compartment heating radiator (3) Fuse box (29) Seat (6) Drive shaft (1) Coolant temperature sensor (1) Lock (4) Suspensions (1) Outside rearview mirror (5) Manufacturer's coat of arms (3) Drums and shoes (1) Windscreen wipers (3) Thermostat (1) Steering rods (1) Turbine (1) Interior blower (3) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos