Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : Shifter boot

Skoda Octavia - Shifter boot

Shifter Boot Skoda Octavia (2012-2019 / mk 3, 5 e)

Skoda Octavia (2012-2019 / MK 3, 5E)
Replacement of the gear lever gaiter and knob of the Skoda Octavia MK3.
Over time, the gear knob and gear lever gaiter of the Skoda Octavia wear out to the point where they need to be replaced. To do this, we open the small storage …Read all…
Posted on 13 March 2025 by ScegliAuto
Cigarette lighter (3) Airbag (7) Alternator (4) Shocks (2) Antenna (1) Car stereo (12) Battery (10) Air vents (3) Transmission (2) Spark plugs (2) Glow plugs (4) Body (1) Glove compartment (7) Key (53) Timing belt (7) Air conditioner (13) Onboard computer (7) Checks and maintenance (24) Dashboard (1) Shifter boot (1) Bearing (1) Brake rotors (1) Rear bench seat (1) Headlight (12) Tail light (9) Fog lights (5) Air filter (7) Cabin air filter (14) Diesel fuel filter (4) Oil filter (3) Parking brake (2) Clutch (1) Window switch (2) Accessory kit (2) Light bulb (7) Side marker bulb (1) Headlight bulb (30) Tail light bulb (4) Instrument panel light (1) License plate light (7) (1) Handle (4) Power window motor (1) Engine oil (3) Clock (25) Door trim panel (19) Front bumper (4) Rear bumper (2) Brake pads (4) Fuel pump (2) Car door (4) Instrument cluster (8) Radiator (1) Heater core (5) Fuse box (59) Seat (10) Axle shaft (1) Engine coolant temperature sensor (3) Door lock (5) Suspension system (1) Side mirror (8) AdBlue warning light (4) Warning light – error code (39) (39) Tire pressure warning light (6) Service warning light (175) Manufacturer emblem (5) Brake drums and shoes (1) Fuel cap (2) Windshield wipers (3) Thermostat (1) Tie rods (1) Turbocharger (1) EGR valve (1) Blower motor (3) Side window (2) Steering wheel (1)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos