Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : Light bulb

Skoda Octavia - Light bulb

Skoda Octavia (2004-2012 / MK 2, 1Z)
How to replace the headlight bulb on a Skoda Octavia version 2.
Let's see how to replace the front headlight bulb on a Skoda Octavia version 2: first, open the front hood, then unscrew the large white plastic screw that we …read all…
Posted on 15 September 2023 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
How to change the license plate light bulb on the Skoda Octavia
In this guide, let's see together the main steps on how to disassemble and replace the light bulbs of the Skoda Octavia license plate. First, let's move to the …read all…
Posted on 11 June 2023 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
How do you replace the bulbs in the center panel of the Å koda Octavia?
In order to replace the bulbs in the central panel of the? Koda Octavia, you must use a screwdriver to pry up and lift the plastic cover that wraps the air …read all…
Posted on 5 June 2022 by ScegliAuto
Skoda Octavia (2012-2019 / MK 3, 5E)
Skoda Octavia front fog light bulb replacement
Let's see in this simple video how to remove and replace the front fog light bulb of a Skoda Octavia from 201 to 2019. First we go to remove the chrome …read all…
Posted on 26 March 2024 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
Disassembly of the third stop and replacement of the lamps on the Skoda Octavia MK2
In today's video tutorial we will see how to remove and replace the third stop and its bulbs on the second series Skoda Octavia, in the station wagon version. …read all…
Posted on 13 March 2024 by ScegliAuto
Cigarette Lighter (3) Airbags (5) Alternator (1) Shock absorbers (1) Car stereo (15) Battery (8) Air Vents (2) Gearbox (1) Spark plugs (2) Glow plugs (2) Glove box (4) Key (30) Timing belt (4) Air conditioning (5) -board computer (12) Checks and maintenance (69) Oil pan (1) Dashboard (3) Bearing (1) Brake discs (1) Rear bench seat (1) Headlight (5) Tail light (6) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel filter (4) Oil filter (3) Clutch (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Side turn signal light bulb (1) Headlight bulb (19) Rear light bulb (4) Dashboard light (1) License plate light (7) Third brake light (1) Handle (4) Engine oil (3) Door panel (16) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (4) Fuel pump (2) Door (2) Instrument cluster (23) Radiator (1) Passenger compartment heating radiator (3) Fuse box (29) Seat (6) Drive shaft (1) Coolant temperature sensor (1) Lock (4) Suspensions (1) Outside rearview mirror (5) Manufacturer's coat of arms (3) Drums and shoes (1) Windscreen wipers (3) Thermostat (1) Steering rods (1) Turbine (1) Interior blower (3) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos