Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : Disassembly of the third stop and replacement of the lamps on the Skoda Octavia MK2

Skoda Octavia - Video tutorial

Model: Skoda Octavia 1Z, MK 2 - Years 2004-2012
Part: Light bulb
Operation: Disassembly of the third stop and replacement of the lamps on the Skoda Octavia MK2

In today's video tutorial we will see how to remove and replace the third stop and its bulbs on the second series Skoda Octavia, in the station wagon version. First of all we open the tailgate of the trunk and begin to disassemble the internal plastic panel, unscrewing the central screw; we then lever the sides to remove it, later disassembling the side uprights, as shown in the video. At this point we use a 13 mm socket wrench to unscrew the screws of the third stop; then let's extract it from the outside, removing the bulb connector and replacing everything!


Posted on 13 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Octavia 2012-2019 - Why are the daytime running lights of the Å koda Octavia not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos