Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : Accessory Kit

Skoda Octavia - Accessory Kit

Skoda Octavia (2012-2019 / MK 3, 5E)
Seat heating installation
The seat heating is carried out through an electric resistance inserted inside the seat itself; before proceeding with the installation, disconnect the …read all…
Posted on 13 August 2023 by ScegliAuto
Skoda Octavia (2004-2012 / MK 2, 1Z)
Installation of the Aux adapter accessory kit and disassembly of the car radio
In order to install the Aux adapter it is necessary to disassemble the original car radio as explained below. First of all, remove the plastic frame around the …read all…
Posted on 1 July 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (5) Alternator (1) Shock absorbers (1) Car stereo (15) Battery (8) Air Vents (2) Gearbox (1) Spark plugs (2) Glow plugs (2) Glove box (4) Key (30) Timing belt (4) Air conditioning (5) -board computer (12) Checks and maintenance (69) Oil pan (1) Dashboard (3) Bearing (1) Brake discs (1) Rear bench seat (1) Headlight (5) Tail light (6) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel filter (4) Oil filter (3) Clutch (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Side turn signal light bulb (1) Headlight bulb (19) Rear light bulb (4) Dashboard light (1) License plate light (7) Third brake light (1) Handle (4) Engine oil (3) Door panel (16) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (4) Fuel pump (2) Door (2) Instrument cluster (23) Radiator (1) Passenger compartment heating radiator (3) Fuse box (29) Seat (6) Drive shaft (1) Coolant temperature sensor (1) Lock (4) Suspensions (1) Outside rearview mirror (5) Manufacturer's coat of arms (3) Drums and shoes (1) Windscreen wipers (3) Thermostat (1) Steering rods (1) Turbine (1) Interior blower (3) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos