Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Handle on a Škoda Octavia?

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Handle

See other generations:
Video tutorial

To remove the external handle on a Škoda Octavia, open the corresponding door to access the hole located in this position: insert a tool to lever inside so that the cylinder is unlocked and can be extracted from its housing. Once the cylinder is removed, you will notice that the handle is freed and can be pulled out from its housing; at this point, insert the new handle and the corresponding cylinder, securing everything.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Remove the External Handle of the Skoda Octavia
How to Remove the External Handle of the Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) To remove the external opening handle attached to the door, you do not need to remove the internal trim panel. Once the door is open, there is a smal…
How to Replace the Door Lock on a Škoda Octavia
How to Replace the Door Lock on a Škoda Octavia
Skoda Octavia (1996-2004 / MK 1, 1U) To replace the door lock on a Škoda Octavia, open the door and remove the two screws located on the side, allowing the external lock next to the hand…
How to Remove the Door Panel of the Škoda Octavia?
How to Remove the Door Panel of the Škoda Octavia?
Skoda Octavia (2004-2012 / 1Z, MK 2) To remove the door panel on the Škoda Octavia, lift the window switch panel to access the three screws underneath. Once these screws are removed, det…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos