Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Škoda Octavia?

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a Škoda Octavia, lift the car, loosen the screws securing the front right wheel, and remove the corresponding wheel arch liner. Once these two components are removed, you can access the belt located on the left side of the engine block.

By loosening the central nut on the tensioner pulley, you can reduce the tension on the belt and slip it off the pulleys, allowing you to fit the new one. After replacement, reassemble the removed parts and check the engine's operation.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Radiator in a Škoda Octavia?
How to Replace the Heater Radiator in a Škoda Octavia?
Skoda Octavia (2012-2019 / 5E, MK 3) You can replace the heater radiator in a Škoda Octavia by loosening the screws that secure the trim panel on the side of the driver's footwell. Once …
How to Replace the Front Headlight Bulb on a Škoda Octavia?
How to Replace the Front Headlight Bulb on a Škoda Octavia?
Skoda Octavia (2012-2019 / 5E, MK 3) To replace the bulb on a Škoda Octavia, open the bonnet to access the components inside the engine bay. Here, locate the internal protective panel of…
How to Replace the Remote Battery of the Škoda Octavia?
How to Replace the Remote Battery of the Škoda Octavia?
Skoda Octavia (2012-2019 / 5E, MK 3) To replace the remote battery of the Škoda Octavia, press the button to allow the key to lift. Once it has lifted, lever it out of its housing to det…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos