Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Bulb on the Skoda Octavia

Model: Skoda Octavia MK 2, 1Z - Years 2004-2012
Part: License plate light

The main steps today will show you how to easily remove and replace the number plate bulbs on the Skoda Octavia. First, move to the rear of the vehicle and start unscrewing the two screws located on the side of the number plate light housing. Then, remove the small bulb and replace it with a new one that has the same fitting, as shown in the video. If necessary, replace the light housing and secure everything properly, replacing the other number plate bulb in the same way.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Number Plate Bulb on the Skoda Octavia
How to Change the Number Plate Bulb on the Skoda Octavia
Skoda Octavia (2004-2012 / MK 2, 1Z) This guide outlines the main steps to remove and replace the number plate bulbs on the Skoda Octavia. First, move to the rear of the car and open the…
How to Change the Number Plate Light on a Skoda Octavia 2?
How to Change the Number Plate Light on a Skoda Octavia 2?
Skoda Octavia (2004-2012 / MK 2, 1Z) The number plate light on the Skoda Octavia 2 is easily replaceable when burnt out because the light unit is easily accessible and the replacement on…
Replacing the Number Plate Bulbs on a Skoda Octavia
Replacing the Number Plate Bulbs on a Skoda Octavia
Skoda Octavia (2012-2019 / MK 3, 5E) Learn how to replace the number plate bulb on a Skoda Octavia. Open the boot and unscrew the two small screws clearly shown in the video. These screw…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos