Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulbs on a Skoda Octavia?

Model: Skoda Octavia 1Z, MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: License plate light

See other generations:
Video tutorial

In this tutorial, you will see how to replace the number plate light bulbs on a Skoda Octavia, a very simple task. First, ensure the vehicle is turned off, then open the boot and remove the two fixing screws of the lamp holder using a Torx T15 spanner.

Once done, pull out the lamp holder, disconnect the power connector, and remove the faulty bulb using a screwdriver. Finally, insert the replacement bulb, preferably an LED type, and reassemble everything by following the reverse procedure.

Repeat the process for the second lamp holder if necessary.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Change the Number Plate Bulb on the Skoda Octavia
How to Change the Number Plate Bulb on the Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) This guide outlines the main steps to remove and replace the number plate bulbs on the Skoda Octavia. First, move to the rear of the car and open the…
How to Change the Number Plate Bulb on a Skoda Octavia
How to Change the Number Plate Bulb on a Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) Replacing the number plate bulbs on a Skoda Octavia. In this video, we will see how to replace the damaged bulbs. Open the boot lid and use a screwdr…
Replacing the Number Plate Bulbs on a Skoda Octavia
Replacing the Number Plate Bulbs on a Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Learn how to replace the number plate bulb on a Skoda Octavia. Open the boot and unscrew the two small screws clearly shown in the video. These screw…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos