Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulbs on Škoda Octavia 3rd Generation

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: License plate light

See other generations:
Video tutorial

Replacing the number plate bulbs on the Škoda Octavia 3rd generation is a fairly simple task as the bulb holders feature a spring release that is easily activated. By pressing with a flat screwdriver on the outer side of the bulb holder towards the inner side, you will notice some play caused by the spring, allowing the outer hook to come out and thus enabling the extraction of the bulb holder.

Once the bulb holder is removed, you will have access to the bulb and the power connector, which can be disconnected for easier access to the bulb. At this point, the bulb can be released via the metal tab that holds it to the bulb holder, and once replaced with a new one, the bulb holder can be reattached in its place.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Replacing the Number Plate Bulb on the Skoda Octavia
Replacing the Number Plate Bulb on the Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) The main steps today will show you how to easily remove and replace the number plate bulbs on the Skoda Octavia. First, move to the rear of the vehic…
How to Change the Number Plate Bulb on the Skoda Octavia
How to Change the Number Plate Bulb on the Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) This guide outlines the main steps to remove and replace the number plate bulbs on the Skoda Octavia. First, move to the rear of the car and open the…
Replacing the Number Plate Bulbs on a Skoda Octavia
Replacing the Number Plate Bulbs on a Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Learn how to replace the number plate bulb on a Skoda Octavia. Open the boot and unscrew the two small screws clearly shown in the video. These screw…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos