Do it yourself
Frequently asked questions about cars and motorcycles

How to Solve Water Infiltration in the Cabin and Dismantle the Door Panel

Model: Skoda Fabia Mark1, 6Y - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

The guide shows how to quickly and economically resolve the water infiltration that occurs in the cabin of some models. The video shows how water penetrates to the bottom of the door pocket, then draining into the cabin; to solve the problem, first dismantle the panel, extract the window winding handle by sliding the adjacent part of the panel upwards and pulling the handle towards you, remove the cover in front of the opening handle, using a screwdriver to gently pry it off. Now dismantle the plastics of the armrest, as shown in the guide, which will give you access to the three screws holding the panel; unscrew them and lever between the panel and the body with a plastic spatula until the panel is free.

At this point, ensure that the plastic clips holding the panel are all functional; if not, replace them. Regarding the door, the guide shows the area affected by the infiltration problem; simply apply silicone over the entire area, allow it to dry, and then reassemble the door panel.


Updated on 1 February 2026 by ScegliAuto


Related tutorials

Skoda Fabia (1999-2007 / Mark1, 6Y) To prevent water or moisture infiltration inside the door panel, it may be useful to apply sealant mastic along the edges of the insulating panel loc…
Skoda Fabia (2014-2021 / Mark3, NJ) Today we will discover the instructions that will allow us to dismantle and remove the door panel of the Skoda Fabia. First, we open the car door and…
Skoda Fabia (2007-2014 / 5J, Mark2) In this tutorial, we can see how to dismantle the front door panel of the Skoda Fabia, an operation that is extremely simple and quick. First of all,…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos