Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Application of Sealant Silicone on Door Panel

Model: Skoda Fabia Mark1, 6Y - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Checks and maintenance

See other generations:
Video tutorial

To prevent water or moisture infiltration inside the door panel, it may be useful to apply sealant mastic along the edges of the insulating panel located just below the panel itself. To carry out this operation, it is necessary to remove the panel and access the aluminium insulating material applied directly to the door; once the outer panel is removed, apply the sealant mastic along the edges and, once dry, proceed with reassembling the panel in reverse order.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Solve Water Infiltration in the Cabin and Dismantle the Door Panel
How to Solve Water Infiltration in the Cabin and Dismantle the Door Panel
Skoda Fabia (1999-2007 / Mark1, 6Y) The guide shows how to quickly and economically resolve the water infiltration that occurs in the cabin of some models. The video shows how water pen…
Repairing Water Ingress in the Rear Door Panel
Repairing Water Ingress in the Rear Door Panel
Skoda Fabia (1999-2007 / Mark1, 6Y) The tools required for this operation are: a flathead screwdriver, a Phillips screwdriver, a T25 Torx key, and a spatula. Remove the handle cover and…
Removing the Door Side Panel on Skoda Fabia
Removing the Door Side Panel on Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Want to remove the door cover panel? Here’s how to remove the door panel on a Skoda Fabia. Detach the plastic covers from the handle, unscrew the sec…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos