Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : Removal of the door panel on Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Door panel
Operation: Removal of the door panel on Skoda Fabia

Do we want to remove the door cover panel? Let's see the disassembly of the door panel on Skoda Fabia. Remove the plastic covering from the handle, unscrew the tightening screws located in the internal handle of the door panel. We remove the screws present in the space of the door opening lever. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable. We carry out maintenance on the inside of the door or we mount the new cover panel. We replace the fixing clips if damaged.


Posted on 24 January 2024 by ScegliAuto



How to disassemble the door panel of a Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) To remove the door panel of the Skoda Fabia, start by removing the interior door handle, usually fixed with screws or clips. Next, remove all visible
How to disassemble the door panel of the 2016 Skoda Fabia
Skoda Fabia (2014-2021 / NJ, Mark3) The steps to remove the door panel of a 2016 Skoda Fabia are short and quick, and can be done independently. To remove the panel, we need to open the
How to disassemble the rear door panel of the Skoda Fabia.
Skoda Fabia (2007-2014 / 5J, Mark2) Today's guide will illustrate the procedure for disassembling and replacing the rear door panel of the Skoda Fabia. First, we open the door (the disa

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos