Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : How to remove the door panel on a Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia 5J, Mark2 - Years 2007-2014
Part: Door panel
Operation: How to remove the door panel on a Skoda Fabia

How to remove the door panel on a Skoda Fabia (front right side): disconnect the battery terminals in the engine compartment (if we have to disconnect the terminals), with a screwdriver we unscrew the screws located in the space of the upper lever of the door opening and the screws on the handle (after removing the cover and plastic push-button panel). Unscrew the remaining screws on the door panel and detach the clips for tightening it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door.


Posted on 4 November 2023 by ScegliAuto



How to disassemble the rear door panel of the Skoda Fabia.
Skoda Fabia (2007-2014 / 5J, Mark2) Today's guide will illustrate the procedure for disassembling and replacing the rear door panel of the Skoda Fabia. First, we open the door (the disa
How to remove the front door panel of a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Before we can start, we will have to go and open the front door of our Skoda Fabia. So let's start by disengaging and removing the window lifter cran
How to disassemble the door panel of a Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) To remove the door panel of the Skoda Fabia, start by removing the interior door handle, usually fixed with screws or clips. Next, remove all visible

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos