Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Skoda Fabia

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Spark plugs

See other generations:
Video tutorial

Open the bonnet and place the support rod. To access the spark plugs, push on the two tabs related to the engine cover and remove it. Use a small flat screwdriver to detach the two tabs holding the coil power harness. To unlock and remove the coils, lever from underneath with a larger flat screwdriver.

Unscrew the spark plugs. Insert and screw in the new ones, using the coil for the initial phase (insertion) and finishing with a 16 mm socket for spark plugs.

Reassemble everything in reverse order. Start the engine for a few minutes.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Remove the Spark Plugs from a Skoda Fabia
How to Remove the Spark Plugs from a Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Before you start, open the front bonnet of your Skoda Fabia. Begin by removing the upper engine cover by simply unclipping it. Next, unclip the clips…
How to Remove Spark Plugs from Skoda Fabia 1.2
How to Remove Spark Plugs from Skoda Fabia 1.2
Skoda Fabia (1999-2007 / Mark1, 6Y) How to remove the spark plugs from a Skoda Fabia? Lift the front bonnet and see how to remove the spark plugs. Remove the engine soundproofing panel,…
How to Replace the Spark Plugs on a Škoda Fabia?
How to Replace the Spark Plugs on a Škoda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) To replace the spark plugs on a Škoda Fabia, open the bonnet to access the upper part of the engine bay by removing the plastic cover of the spark pl…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos