Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : How to disassemble the spark plugs of the Skoda Fabia 1.2

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Spark plugs
Operation: How to disassemble the spark plugs of the Skoda Fabia 1.2

How to disassemble the spark plugs of the Skoda Fabia? We lift the front hood and see the disassembly of the spark plugs. Disassemble the engine soundproofing panel, remove the coils on the engine head with a screwdriver or pliers; immediately afterwards unscrew the spark plugs with a socket wrench: pull them out of the cylinder head at the end of the disassembly. We take the new spark plugs and accompany them with the socket wrench extension in the engine head, tighten them and connect the power coils to each spark plug. At the end of the replacement we just have to mount the cover panel and test the start of the vehicle.


Posted on 4 February 2024 by ScegliAuto



How to disassemble the spark plugs of a Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Before we can start, we will have to go and open the front hood of our Skoda Fabia. So let's start by disassembling and removing the upper engine cov
How do you replace the candles of the Å koda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) In order to replace the spark plugs on the Å koda Fabia you have to open the hood, so that you can access the upper part of the engine compartment by
Replacement spark plugs on Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Open the hood and put on the special support rod. To access the spark plugs, push on the two tabs on the engine cover and remove it. Using a small fl

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos