Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Fabia
  6. : How to remove the seat of a Skoda Fabia 2

Skoda Fabia - Video tutorial

Model: Skoda Fabia 5J, Mark2 - Years 2007-2014
Part: Seat
Operation: How to remove the seat of a Skoda Fabia 2

How to disassemble the front seat of the Skoda Fabia? We go inside the vehicle and see the disassembly of the pieces. We move the seat back and bring the seat up, then, with a socket wrench, unscrew the tightening screws placed on the front rail. After removing the screws at the top, we move the seat forward and remove the screws from above the metal rail. We disconnect the power terminals of the front seat if there are any. We fix the seat above the sliding rails and screw in the clamping screws. We test the seat back and forth to see how it works.


Posted on 12 February 2024 by ScegliAuto



Fold up the rear seat of the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Let's see how the rear seat of the Skoda Fabia flips. We grab the seat of the seat and move it from under the backrest, then place it near the front
Skoda Fabia front building disassembly
Skoda Fabia (1999-2007 / Mark1, 6Y) In today's video we will see how to disassemble and remove the front seat of a Skoda Fabia. First we go to open the bonnet and disconnect the two bat
Where is the OBD2 port located on the Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) If you want to be able to find the OBD2 port located inside your Skoda Fabia first generation (year 1999-2007), all you have to do is read the follow

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos