Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Wishbone Bushes

Model: Skoda Fabia Mark1, 6Y - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Bushings

See other generations:
Video tutorial

The failure of the rubber part of the damper (silent block) on the wishbone of the suspension is a common issue, especially for vehicles that drive on snowy or icy roads treated with salt during winter: therefore, it is always advisable to lubricate all rubber components before winter.

In any case, you can purchase a repair kit consisting of a bush to fit into the aluminium support: to carry out this operation, you will need to prepare a type of puller made from a threaded bar, washers of appropriate diameter, and the corresponding nuts.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Wishbone Bushes
Replacement of Front Wishbone Bushes
Skoda Fabia (1999-2007 / Mark1, 6Y) The failure of the bushes (silent block) in the front suspension is a common issue in these vehicles, making the ride on uneven surfaces particularly…
How to replace the control arm of the Skoda Fabia III
How to replace the control arm of the Skoda Fabia III
Skoda Fabia (2014-2021 / Mark3, NJ) In this video we can see how to replace the control arm of the Skoda Fabia III: it will be necessary to lift the car and remove the front wheels: rem…
Folding the Rear Seat of the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Learn how to fold the rear seat of the Skoda Fabia. Grab the seat base and move it away from under the backrest, then place it next to the front back…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos