Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Škoda Yeti?

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

Video tutorial

To reset the Service light, go inside the cabin and work with the instrument cluster switched off. First, press and hold the button for resetting the trip odometer, located at the bottom right of the steering column. While holding this button, turn the key to switch on the instrument cluster: a message will appear asking if you really want to reset the Service light.

Select "Ok" to confirm, using the button on the right side of the steering wheel. Once confirmed, you can check the reset by switching off and then back on the instrument cluster.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Škoda Yeti
How to Reset the Service Light on a Škoda Yeti
Skoda Yeti (2009-2017 / MK 1) To reset the service light on a Škoda Yeti, press and hold the button located at the bottom right of the instrument panel. While holding the button, …
How to Reset the Service Light on a Škoda Yeti?
How to Reset the Service Light on a Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) To clear the Service light on a Škoda Yeti, enter the cabin with the instrument cluster off. Press and hold the trip reset button located at the bott…
How do you reset the service light on the Škoda Yeti?
How do you reset the service light on the Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) By entering the cabin and acting with the instrument panel off, you can reset the Service light of the Škoda Yeti. First of all, you will need to hol…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos