Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Front Headlight Bulbs of the Skoda Fabia

Model: Skoda Fabia Mark2, 5J - Years 2007-2014
Part: Headlight

Remember, to avoid damaging the bulb of your Skoda, never touch the glass with your fingers. Open the bonnet; you can access the bulbs (main beam, dipped beam, and side lights) from the cap near the headlight unit in the engine compartment. Remove it to access the main/dipped beam bulb. Disconnect the connector, then release the metal spring to remove the bulb. When refitting, ensure the correct orientation, then close the spring and reconnect the connector. Next to it is the connector for the side light bulb. Pull it out to remove the bulb, which is secured by a bayonet fitting. Simply pull it to extract it. Use the same method to refit it into its housing. Close the cap. Next to it is the indicator bulb. Rotate it a quarter turn and pull it out. To remove the bulb, turn it a quarter turn. To refit it, repeat the procedure in reverse.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Fabia (2007-2014 / Mark2, 5J) This guide will show us the procedure for disassembling and replacing the position light bulb of the front headlight of the Skoda Fabia. First, we op…
Skoda Fabia (2007-2014 / Mark2, 5J) This video demonstrates the necessary procedure to replace the rear light bulbs of the Skoda Fabia 2 produced from 2007 to 2014. To replace the bulb,…
Skoda Fabia (1999-2007 / 6Y, Mark1) To replace the front indicator bulb on the Škoda Fabia, open the bonnet to access the engine bay. This will allow you to pull the bulb from its housi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos